产品设计：广东安规检测有限公司

设计标准：7006-27G-1 E14灯头量规是广东安规根据标准IEC60061-3,GB/T1483.1的要求设计制作而成。

产品用途：

检验成品灯上E14灯头尺寸S1的最大值和最小值。

To check the deminsion S1 minimum and S1 maxiimum of E14 caps on finished lamps.

使用方法：

当成品灯的灯头完全插入量规时，柱塞的W面应与X面共面或凸出X面，但不应凸出Y面。

When the cap on a finished lamp has been pushed into the gauge as far as it will go, the plunger surface W shall be co-planar with or project byond surface X but it shall not project beyond surface Y.